SuperMax SM 3000HD 3G Dead Receiver Recovery Tool
If your super max 3000 hd receiver dead dont i m here to solve this complete method just follow these simple steps and complete recover your digital receiver with 100% working.
First of all unzip UART ISP(20130520).rar folder and put the folder into root directory of
D disk.Connecting your receiver with PC by UART cable or RS232 Cable
D disk.Connecting your receiver with PC by UART cable or RS232 Cable
1. Finding right serial port number and modify the info. of UART_ISP.bat: e.g.:Right click UART_ISP.bat and seletct edit ,if the serial port number is 3, modify as below,make the number after c to be 3: ConsoleDown_v1.3.3.11.exe -c 3 -i 1512 -b 19200
2. Copy sw named rom.bin into file UART ISP(20130520)(Pls note that rom.bin sw should be asked from engineer,which is totally different from what we update by USB)
3. Power off your receiver open UART_ISP.bat When you see“Please Turn On the Power….”,Pls Power on your receiver.
4. Then If there is“Connect to platform successfully!”,which means connecting successfully
If no this sentense showed up in ten seconds,pls restart your receiver to make it reconnect
5. If connect successfully,it will automatically program sw in flash..
When you see“Wait for reset system” as below picture,means new sw has been programed in receiver.
6. If you see timeout or error during programming,pls restart above steps again.
Note that we need around 15 minutes to finish this job for one time.
When you see“Wait for reset system” as below picture,means new sw has been programed in receiver.
6. If you see timeout or error during programming,pls restart above steps again.
Note that we need around 15 minutes to finish this job for one time.
SEE THIS PICTURE OF UART CABLE
Download recovery Tool here
